Technical Data:

Max hole Ø mm: 18mm
Max material thickness: St : 42 - 10mm
Total punching time:
With Pump SC05 ll: Approx 7 seconds
With Pump SC17 ll: Approx 4 seconds
Throat Depth: 60mm
Max Pressure:700 kg/cm²
Punching Power:22 t
Punch Stroke: 16mm
Weight: 17 kg

Standard Equipment:

APS 60 Punching Unit , Control cable and Hydraulic hose 5m Spanner, Punch and Die Ø 14mm

To view the ALFRA®PRESS APS 60 manual Click Here

For Tools,Punches & Dies Click Here

Technical Data:

Max hole Ø mm: 22mm
Oblong holes max: 22 x 14mm
Max Material Thickness: st: 42- 13 mm
Total punching time:
With Pump SC05 ll: Approx 10 seconds
With Pump SC17 ll: Approx 5 seconds
Throat Depth: 70mm
Max Pressure:700 kg/cm² ( 10000psi )
Punching Power:30 t
Punch Stroke: 16mm
Weight: 21 kg

Standard Equipment:

APS 70 Punching Unit , Control cable and Hydraulic hose 5m Spanner, Punch and Die Ø 14mm, Depth Fence, Suspension Hook.

To view the ALFRA®PRESS APS 70 manual Click Here

For Tools,Punches & Dies Click Here

Technical Data:

Max hole Ø mm: 25mm
Oblong holes max: 25 x 18mm
Max Material Thickness: st: 42- 16 mm
Total punching time:
With Pump SC05 ll: Approx 15 seconds
With Pump SC17 ll: Approx 8 seconds
Throat Depth: 110mm
Max Pressure:700 kg/cm² ( 10000psi )
Punching Power:44 t
Punch Stroke: 25mm
Weight: 35 kg

Standard Equipment:

APS 120 Punching Unit , Control cable and Hydraulic hose 5m Spanner, Punch and Die Ø 14mm, Depth Fence, Suspension Hook.

To view the ALFRA®PRESS APS 120 manual Click Here

For Tools,Punches & Dies Click Here

IMPORTANT TECHNICAL NOTICE:

The APS Punching Units are not suitable for punching high tensile tool steels, stainless steels or boiler plates.

Please ask for technical advice for punching jobs in this application range.

Technical Data:

Working Pressure max: 750 kg/cm²
Pump Capacity:
0 - 100 kg/cm²: 50 HZ 1.18 l/min.
100 - 700 kg/cm²: 50 HZ 0.54 l/min.
Oil Quantity: 5 l
Single Phase motor 1500 rpm: 550 W 110v & 230v 50 HZ
Weight inc. Oil & Roll Bar: 29 kg

To view ALFRA®PRESS Brochure Click Here

For Further information or advice CONTACT US

Technical Data:

Working Pressure max: 750 kg/cm² (10670 psi )
Pump Capacity: 50 HZ 1.63 l/min
Oil Quantity: 17 l
Single Phase motor 1450 rpm: 1500 W 110v & 230v 50 HZ
Weight inc. Oil & Transport Rollers: 29 kg
Dimensions L x W x H: 550x370x560mm

 

 

"THIS NEW PUMP WAS ESPECIALLY DEVELOPED TO DRATSTICALLY REDUCE THE PUNCHING TIME. SPECIALLY SUITABLE FOR USE IN THE WORKSHOP."

To view ALFRA®PRESS Brochure Click Here

For Further information or advice CONTACT US

.

WITH BLOCKING DEVICE,SPRING FRACTURE SAFETY DEVICE ,LENGTH OF CABLE 2M

TIP:

ACTUATION OF SPRING HOIST ONLY WHEN SUSPENDED PUNCHING UNIT RESP,UNDER LOAD.

To view ALFRA®PRESS Brochure Click Here

For Further information or advice CONTACT US

This handy time and energy saving cart makes the handling of our Hydraulic Punching Units more comfortable.
Absolutely necessary for every structural steel worker even where our Hydraulic Punching Units are already in use.

• Easy positioning of the Punching Head at the steel grinder due to gas pressure shock absorber.
• Being located on the Service Boy the hydraulic pump does not need to be carried any longer.
• Tool cabinet with drawers for clean arrangement of the punching tools and accessories.
• Solid and safe construction with TüV certificate
  ( Tested by the German Technical Supervision Authority ) less expensive than any "Self Made" construction.
• Dimensions ( LxBxH ) 900 x 530 x 2000mm.
• Complete with tool cabinet and drawers.

(Tools and Punching Unit/Pump not included)