banner
Safety Glasses

 

ALFRA-ROTABEST® ACCESSORIES & ATTACHMENTS

CHUCKS - TOOL HOLDERS - ROTA QUICK® - CLAMPING ATTACHMENTS - VACUUM ATTACHMENTS - TAPPING ATTACHMENTS COOLANT UNITS - ALFRA Bio 2000 - WAX PIN - ALFRA SUPERCUT - MAGNETIC CHIP REMOVER - ADAPTORS

 

 

 

For 32/50, 36/50, 50/50, 75/50, 100 and Older Generations
Description

Product No

32/50
50/50
75/50
100
   
36/50
     
Drill Chuck with Weldon shank 18107
     
For twist drills 1-13mm          
Drill Chuck with MT2 shank 18008  
YES
For twist drills 3-16mm          
Drill Chuck MT3 shank 18009    
For twist drills 0-16mm          
Tool Holder AMK 2 - MT 2 18003  
For core drills with Weldon shank      
With
With
12-60mm      
reducing
reducing
With automatic internal cooling & nipple for      
sleeve
sleeve
coolant hose suitable on all machines with      
MT 3/2
MT 3/2
MT 2 shank.          
Tool Holder AMK 3 - MT 3 18025    
For core drills with Weldon shank 12-60mm          
With automatic internal cooling & nipple for          
coolant hose suitable on all machines with          
MT 3 shank          
Tool Holder AL 3 - MT 3 20230    
For core drills strong construction 51-100mm          
With automatic internal cooling & nipple for          
coolant hose.          
Quick Change Arbor Rota-Quick 18650  
MT2      
With
With
With automatic internal cooling & nipple for    
reducing
reducing
coolant hose .Suitable on all machines with    
sleeve
sleeve
MT 2 shank          
Quick Change Arbor Rota-Quick 18651    
MT 3          
With automatic internal cooling & nipple for          
coolant hose .Suitable on all machines with          
MT 3 shank          

 

For 32/50, 36/50, 50/50, 75/50, 100 and Older Generations
Description

Product No

32/50
50/50
75/50
100
   
36/50
     
Vacuum Attachment Vacubest 18150
.
.
.
.
Use on non-magnetic surfaces such as Aluminum,          
copper,brass,stainless steel,plastics,structured materials          
(eg. bulb or checker plate)          
Vacuum capacity:1.5 m3/h - 25l/min          
Max Vacuum:200 mbar (abs)          
Overpressure:300 mbar          
Dimension of vacuum plate:400x200 mm          

 

Scope of supply:

Pump (230 v,50Hz) vacuum plate,hose 3m

TIP: Please explain operation range(problems)

We are here to give advice:Contact Us

Product:18150        
Tapping Attachment M3 - M12 18652  
.
With Reducing sleeve MK 3/2
 
Scope of supply:          
With Rota-Quick® shank and MT 2          
Tapping Attachment M10 - M20 18653    
With reducing sleeve MK 3/2
 
Scope of supply:          
With Rota-Quick® shank and MT 2          
Coolant unit complete 18104
.
.
.
.
ALFRA Bio 2000 21010
.
.
.
.
Cutting and Drilling Spray          
Sprayer 405 mm          
High performance Wax Pin 09011
.
.
.
.
Ideal for vertical and overhead core drilling.          
Paste sticks to the cutter.          
ALFRA Supercut 5 Ltr 21010A
.
.
.
.
ALFRA Supercut 500 Ml 21010D
.
.
.
.
ALFRA UK          
ALFRA Magnetic Chip Remover 18654
.
.
.
.
In a Stainless Steel round rod,you can move a magnet          
back and forwards. The strong magnet attracts the chips          
then pull the knob and the chips fall down.          
See the illustration below....          

ALFRA MAGNETIC CHIP REMOVER

 

 

MECHANICAL CLAMPING ATTACHMENT FOR PIPES

Product 18019

"If all hell is let loose" on site or in the workshop !
Our mechanical attachment for clamping pipes with tension chains enables
for the use of Magnetic Core Drilling Machines on pipes from Ø 80mm.
The adjustment is carried out by means of clamping jaws.
For pipes of various Ø.

Base plate for magnet foot 100 x 205 mm

 

 

Attachment for clamping Pipes .......          
With 1 tension chain Ø 80-300 mm 18019
 
Weight 7.5kg          
With 2 tension chains Ø 80-900 mm 18020
Weight 12kg          
Attachment for Clamping Pipes with 18021
 
1 tension strap Ø 80- 900 mm, Weight 6.5kg          

 

 

TOOL HOLDERS

  • Tool Holders are necessary when using Magnetic Drilling Machines without Weldon shank.
  • The capacity of Magnetic Drilling Machines of older generations with morse taper can be enlarged.
  • The cutters can then be mounted with the Tool Holders as well as on pillar drilling machines and milling machines.
  • With automatic internal cooling.
  • All Tool Holders are supplied in a stable plastic case.
For 60, 100 and Older Generations
Description

Product No

 
     
Tool Holder AMK 2 Morse Taper 2 for cutters 18003  
With Weldon shank    
Ø 12 - 60 mm    
With automatic internal cooling and nipple for coolant hose.    
Suitable for all machines with drill MT 2    
    MT 2
Tool Holder AMK 3 Morse Taper 3 for cutters 18025  
With Weldon shank    
Ø 12 - 60 mm    
With automatic internal cooling and nipple for coolant hose.    
Suitable for all machines with drill MT 3    
    MT 3
Tool Holder Al 3 Morse Taper 3 20230  
For cutters strong construction    
Ø 51- 100 mm    
With automatic internal cooling and nipple for coolant hose.    
    202... Range
Tool Holder Al 4 Morse Taper 4 20240  
For cutters strong construction    
Ø 51- 100 mm, with key way    
With automatic internal cooling and nipple for coolant hose.    
Tool Holder Al5 Morse Taper 5 20250  
For cutters strong construction    
Ø 51- 100 mm, with key way    
With automatic internal cooling and nipple for coolant hose.    
Quick-Change Tool Holder Rota-Quick® 18650  
Morse taper 2    
With automatic internal cooling and nipple for coolant hose.    
Suitable for all machines with drill spindle MT2    
    Rota Quick
AMK2 MT without automatic cooling 18003A  
     
AMK3 MT without automatic cooling 18025A  
     
     

 

 

ROTABEST® ADAPTORS

You use FEIN Magnet Drilling Machine?

You don't want to be without AFRA Roatabest® Cutters?

No problem we have the suitable adaptors..........

18.0 to 32.0 mm on FEIN Magnet Drill
 
 

Product No

 
     
Adaptor with internal thread M 18x6P 1.5 20201  
Adaptor for the use of Rotabest HSS-Co-Eco Cutters from    
Ø 12.0 to 32.0 mm and Rotabest TCT Cutters from    
Ø 18.0 to 32.0 mm on FEIN Magnet Drilling Machines   
Type KBM 542    
    MT 2
Adaptor with Eternal Thread 20202  
Adaptor for use of FEIN Cutters with internal thread    
M18 x 6P 1.5    
On Magnet Drilling Machines with Weldon shank.    
     
    MT 3
     
     
FOR FURTHER INFORMATION OR ADVICE PLEASE CONTACT US
CLICK HERE
PLEASE CLICK HERE