banner


ALFRA® BEVEL MILLING MACHINE

SKF 63 - 15 - SPECIAL ACCESSORIES - SPARE PARTS

 

THE ALFRA BEVEL MILLING MACHINE WAS ESPECIALLY DEVELOPED FOR THE PREPERATION OF WELDS AND FOR THE BEVELLING OF METALIC MATERIALS.

  • LOW WEIGHT ENABELING THE UNIVERSAL USE OF THE WORK PIECE.
  • MACHINE IS DESIGNED FOR ONE HAND OPERATION SUITABLE FOR THE
    MILLING OF STEEL,CHROME NICKEL STEEL, CAST IRON AND NON FERROUS
    HEAVY METALS.
  • THE MACHINE IS SET AT THE EDGE OF THE WORK PIECE AND MOVED WITH
    A SLIGHT PRESSURE ( MANUAL FEED ).
  • THE CONSTRUCTION OF THE MILLING DISK, UNDER THE USE OF
    COMMERCIALLY AVAILABLE MILLING PLATES AND A ROTATION SPEED
    OF 2870 rpm, GUARENTEES A STEADY BEVEL MILLING MACHINE
    WITHOUT VIBRATION ( NOT RATTLING ).
  • THE GUIDE ROLLERS RAILS ARE MADE TO HARDENED STEEL AND
    GUARENTEED CONVINCING FEED VALUES.
  • EASY AND SAFE OPERATION BY ELECTRONIC SWITCH OFF CONTROL
    IN THE EVENT OF EVERSTRESSING AND RECLOSURE PREVENTING DEVICE.
  • OFF BUTTON INTEGRATED IN RIGHT HANDLE.
  • ALSO AVAILABLE FOR THE BEVELLING OF PIPES FROM Ø 160mm TO
    390mm BY MEANS OF A SPECIAL ACCESSORY

FOR BEVEL WIDTH OF MAX 15mm AND WITH A CONTINUOUSLY VARIABLE ANGLE ADJUSTMENT 30° - 60°

ALFRA®

BEVEL MILLING MACHINE SKF 63-15............................... .............Prod No: 25010

Technical Data:

Motor Voltage: 1050 Watts
Capacity: 400 rpm
Rotation Speed: Integrated, automatic
Bevel Width: Adjustable in height
Bevel Angle: 129 mm,range 100-200 mm
Weight: 8000 N
Dimensions: 70 x 160mm

 

 

Contents:

Bevel Milling Machine, 1 Set of Tools, Operation Manual, Transport Case.

BEVEL MILLING MACHINE

 

 

ALFRA® BEVEL MILLING MACHINE SPECIAL ACCESSORIES

Pipe insert for the processing of external bezels on pipes from Ø 160 - 390mm 25014

 

 

ALFRA® BEVEL MILLING MACHINE SPARE PARTS

Spare milling head for St.37 Spun 12008 cpl. 25011
Consisting of:  
2 Milling disks and 6 pcs of high speed indexable inserts each.  
   
Spare indexable insert for St.37 Spun 12008 25013
   
Spare milling head for radius R=3.5 cpl. 25017
Consisting of:  
2 Milling disks and 6 pcs high speed indexable inserts each.  
   
Spare indexable insert with radius R= 3.5 25018
   
Spare Milling disk ( 1pc without inserts) 25012
   
Spare indexable inserts for other materials 25016
( Please refer to the operation manual )  
   
Milling disk assembly device 25019
For an easy assembly of the indexable inserts.  

 

 

 

FOR FURTHER INFORMATION OR ADVICE PLEASE CONTACT US
CLICK HERE

 

 

 

 

 

 

ALFRA UK Ltd PLEASE CLICK HERE